Husqvarna Quilt Binder Foot 920507096

The Double Fold 1⁄2 Inch (12mm) binder will turn a light weight woven.fabric strip into a binding and attach it to the project edges all in one.step when fitted with 412964206 or 412964207 stitch plate.To bind edges with the 1⁄2 Inch (12mm) Quilt Binder, cut a 13⁄4 Inch (45mm).wide strip of light weight woven fabric

• Attach the Interchangeable Dual Feed and Quilt foot.
• Set the machine for straight stitch or hand look quilt stitch.
• Place the attachment plate on the stitch plate of the machine. Align pin on the back of attachment plate to the top opening on the stitch plate of the machine. Screw the attachment plate in place with one thumb screw
• Place the binder on the attachment plate and adjust the binder to line up. Attach the binder in place with the two thumb screws and washers.
• Measure the length of your project and add at least 6” (15cm).
• Cut enough 1 3/4” (45mm) strips to equal that number and join the strips together. Cut the end of the strip into a point.
• Slide the fabric strip into the binder with the wrong side facing you using tweezers.
• When the fabric is through the end of the binder, hold the folded strip with your left hand and continue to feed it into the binder as shown while the fabric forms a double fold tape.
• Raise the presser foot and pull the strip under the foot and straight back 2.5” (5-6cm) behind the needle.
• Slide the fabric to be bound right side up into the slot of the binder. Adjust the stitch position to right or left to reach the desired needle position.