Husqvarna Spanish Hemstitch Foot 413064845
SKU: NA0763
£37.00
🚚 Order within the next 0 Day(s), 2 hours, 15 minutes, 27 seconds for delivery by 19 Jul, 2024.
Product Overview
Product Overview
Spanish Hemstitching is a delightful addition to any project. It is used to join two finished edges. It works well to attach borders, edging to a skirt or curtain or to piece fabric, for example to achieve the width needed for a tablecloth. For the above models, the Spanish Hemstitch Distance Plate snaps on to the standard needle plate.
- . Snap the Distance Plate onto the needle plate by placing the little prongs into the holes in the plate.Be sure that the plate doesn’t cover the feed teeth.Snap on the Spanish Hemstitch Foot.
- Thread with a decorative thread on top and in the bobbin.
- Select a zigzag, three step zig zag. Adjust stitch width to make sure that the needle catches the fabric edges.
Note: Avoid using stitches with too much side motion and stitches with too much motion forward and back. - You need to have a finished edge. If necessary, press under a 3/8” (1 cm) seam allowance on the fabric edges that will be stitched together.
- Place the pressed edge of the pieces on each side of the Distance Plate.
- Lower the presser foot.
- Start with a long thread tail of both top and bobbin thread. Hold these threads as you begin sewing until the needle catches on the fabric. Because of the nature of the stitching, it will stitch on “air” for several stitches before it goes over and catches the fabric edge. Once the needle has caught the fabric, you can let go of the threads. Sew, holding the edges gently together in front of the foot.
- Optional: Place a decorative thread in the groove of the Distance Plate.
Product Downloads
Cut Type: Fat Quarter
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Cut Type: By the Metre
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Choose from options
Husqvarna Spanish Hemstitch Foot 413064845
£37.00