Husqvarna Strap And Belt Loop Foot 620097196
SKU: NA0783
£30.00
🚚 Order within the next 0 Day(s), 2 hours, 15 minutes, 27 seconds for delivery by 19 Jul, 2024.
Product Overview
Product Overview
With the Strap and Belt Loop foot, create straps and belt loops easily using a cover stitch. Just put a strip into the foot and the strip is folded automatically and stitched in place.
- Set the machine for a Coverstitch wide.
- Use the default stitch settings. Adjust if needed.
- Cut a strip of fabric, 1” (25mm) wide.
- Cut the top corner of the strip at a 45 degree angle to form a point.
- Insert the cut angle into the guide, right side of the fabric facing up. Pull the strip through the slot and under the foot. Extend the tail of the strip behind the foot (Illustration 1). Use a tweezers to feed the strip into the foot if needed.
- Snap the Strap and Belt Loop foot onto the machine.
- Slide the strip approximately 2” (5cm) behind the foot
- Lower the presser foot. Be sure both raw edges of strip are turned under before stitching. Sew the fi rst few stitches. Stop and clip the needle threads close to the presser foot and continue sewing
- For even feeding, hold the fabric strip slightly below the fi rst guide in the front of the foot (Illustration 2).
- Sew at medium speed. Check the fabric as you sew to ensure proper feeding. Note: Sew the folded fabric strip without additional fabric underneath to create straps and belt loops or sew the folded strip onto another fabric for decorative effects
Product Downloads
Cut Type: Fat Quarter
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Cut Type: By the Metre
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Choose from options
Husqvarna Strap And Belt Loop Foot 620097196
£30.00