Pfaff 4Mm Rolled Hem Foot For Idt System 820221096

Pfaff 4Mm Rolled Hem Foot For Idt System 820221096

SKU: NA0595

£28.00

Quantity

Length

🚚 Order within the next 2 hours, 15 minutes for delivery by 19 Jul, 2024.

Product Overview

Hemming prevents the edges from fraying and results in a clean, durable edge. With the Rolled Hem Foot, you can hem light to medium weight fabrics for clothing and home decorating items without having to pre-iron the fabric edges.

Select a straight stitch, snap on the Rolled Hem Foot and engage IDT system (if available on your machine).
If needed, press only the beginning of the hem to 2, 3 or 4 mm wide, depending on the size of your foot.
Place it flat in the groove under the foot and sew, pulling the cut edge of the fabric into the scroll of the hemmer.
Lower the foot and continue sewing while holding for a few stitches.
Lower the needle into the fabric to hold it in place.
Then raise the presser foot keeping the cut edge up in front of the foot.
Do not allow fabric to run under the right half of the presser foot.

Cut Type: Fat Quarter

Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered. We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).