Husqvarna Piping Foot 411851045

SKU: AA0180

£24.50

Quantity

Length

🚚 Order within the next 2 hours, 15 minutes for delivery by 17 Aug, 2024.

Product Overview

PIPING FOOT Fits all classes of Husqvarna Sewing Machine

Insert packaged Piping into seams and edges for a tailored fi nish. Cover cord with fabric for specialty piping. Straight stitch, length 2.5.

Snap on the Piping Foot. To stitch piping into a seam.
Place piping along seam line on right side of fabric. Place second piece of fabric on top withright sides together.
Put fabric and piping layers under Piping Foot with the piping in the groove on the underside of the foot. Sew. The groove on the underside of the foot will guide the piping as you sew. (Hint: Notch the seam allowance of the piping on curves and corners.
To make piping from your fabric:
Cut Bias or crosswise grain strips, wide enough to cover the cording plus seam allowances. Lay the cording on the wrong side of the fabric strip and wrap the fabric over the cord.
Place the fabric and cord under the Piping Foot with the cord in the groove on the underside of the foot
Sew. The groove will guide the cord so the fabric covers it evenly. (Hint: When you sew thispiping into a garment, adjust the needle position so it stitches one setting closer to thecord to cover the first stitching.)

Cut Type: Fat Quarter

Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered. We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).