Husqvarna Adjustable 1/4 Inch Foot With Guide 920456096
SKU: NA0808
£28.00
🚚 Order within the next 0 Day(s), 2 hours, 15 minutes, 27 seconds for delivery by 20 Jul, 2024.
Product Overview
Product Overview
Piecing: The Adjustable ¼ Inch Foot with Guide is designed to help you .achieve a ¼ Inch(6mm) or scant ¼ Inch (less than 6mm) seam when piecing..The needle hole in the foot is oval shaped allowing you to adjust the .needle position. The distance between the center needle position and .the guide is ¼ Inch (6mm).
- Snap-on the Adjustable ¼” Foot with Guide. *
- Select a straight stitch. a. For a 1/4” (6mm) seam; select a centered the needle position. b. For a scant 1/4” seam; adjust the needle position one or two steps to the right.
- lace the fabric pieces right sides together under the presser foot, aligning the edges of the fabric with the guide on the foot.
- Sew the fabric pieces together guiding the fabric so that the edges touch the guide.
- Press the seam allowance
- Note: Depending on the weight of your fabric and thread it may be necessary to adjust the needle position to achieve your desired seam allowance. Move the needle to the right to decrease the seam allowance and to the left to increase it. You can safely move the needle three steps in either direction, but not more
- * Do not use the Straight stitch plate when using the Adjustable ¼” Foot with Guide.
- Topstitching: The Adjustable ¼” Foot with Guide is also wonderful for topstitching. Adjust the needle position and use the guide to place your stitching exactly where you want it on your blocks, garments or home decor projects.
- Snap-on the Adjustable ¼” Foot with Guide
- Select a straight stitch, triple straight stitch or the mock hand quilting stitch. Adjust the needle position as desired if needed. Place the project under the presser foot so that the guide on the foot runs in the ditch of the seam or along the edge of the fabric. Sew. NOTE: Red markings on the Adjustable ¼” Foot with Guide help you align the fabric when you start sewing, at corners and at the end of your fabric.
Product Downloads
Cut Type: Fat Quarter
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Cut Type: By the Metre
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
Choose from options
Husqvarna Adjustable 1/4 Inch Foot With Guide 920456096
£28.00