Husqvarna Piping Foot 620116996
SKU: NA0788
£32.00
🚚 Order within the next 2 hours, 15 minutes for delivery by 20 Jul, 2024.
Product Overview
Product Overview
This presser foot is suited for sewing welting between two layers of fabric
- Preparing the machine :Needle: Left or both left and right
- Stitch type: Three-thread overlock or four-thread overlock
- Stitch type: 2-5mm
- Differential feed lever: Normal position
- Upper knife: Working position
- Sewing : Place fabric with right sides facing
- Place cording (piping) in between upper and lower fabrics and insert fabrics under cording foot with cording positioned in groove under foot.
- Sew while guiding both cording (piping) and fabric
- Note: Cording (piping) using bias tape and cord can also be done with this foot
Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered.
We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).
Our fabric can be cut as a Long Quarter, measuring a minimum of 25cm x width of bolt. We will supply the fabric as a continuous length (eg; if you bought 1.25m it will be sent as one piece of fabric).
You may also like
Get Inspired
From our experts to you
