Pfaff Decorative Trim Foot For Idt System 820614096

Pfaff Decorative Trim Foot For Idt System 820614096

SKU: NA0616

£28.00

Quantity

Length

🚚 Order within the next 2 hours, 15 minutes for delivery by 19 Jul, 2024.

Product Overview

Embellish your project with different types of trims by using the Decorative Trim Foot. This foot will easily guide the trims through the opening at the front and through the groove under the presser foot.

Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.
Select a straight stitch, zigzag stitch or decorative stitch. Avoid using stitches with side motion and stitches with too much motion forward and back.
Tip: For the 6mm wide trims, you can also use a 6mm twin needle. Select a straight stitch and it will sew at the edges of the trim.
Place the trim in the presser foot as the picture shows.
Snap on the Decorative Trim Foot.
Engage IDT system.
Sew carefully, not too fast. If your machine has the sew slow function, engage it. (You might need stabilizer underneath the fabric)
The best result is achieved if you use flat trims, such as silk, velvet, satin or cotton ribbons.

Cut Type: Fat Quarter

Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered. We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).