Pfaff Piping Foot With Cording Guide 620097096

Pfaff Piping Foot With Cording Guide 620097096

SKU: NA0572

£30.00

Quantity

Length

🚚 Order within the next 2 hours, 15 minutes for delivery by 19 Jul, 2024.

Product Overview

With the Piping foot with Cording guide, you can create piping, corded tucks and decorative trims.

Easily create your own piping:
Set the machine for Chainstitch.
Use the default stitch settings. Adjust if needed.
Note: Although the machine recommends needle D, you will use needle E for this technique instead.
Snap on the Piping foot. (The cording guide is not used for this technique.)
Place the cord in the groove on the bottom of the foot and pull the cord tail behind the foot about 21/2 Inch (5cm). Note: 1/4 Inch - 5/8 Inch (1.5 - 2.0mm) cord can be used.
Cut a strip of fabric on the bias, 1 Inch (25mm) wide.
Wrap the fabric around the cord in the front of the foot. Slide the fabric under the foot.
Lower the presser foot and sew over the cord and fabric (illustration 1). (Hold the cord behind the foot as you begin to sew.)

Cut Type: Fat Quarter

Our standard width fabric can be cut as a Fat Quarter, measuring 50cm x 1/2 the width of the bolt. Above is an example of how your fabric will be received, depending on the quantity ordered. We also offer a sample service, where you can order 1 single fat quarter of any standard width fabric, to have at home and compare colours. When you are finished, you can send them back to us for a refund (feel free to contact us for more information on this service).