Pfaff Quilt Binder 821163096

This quilt binder attachment is perfect for attaching binding to your quilt projects. The quilt binder has a large opening to accommodate the quilt layers and creates a finished binding size of 1/2 Inch. The quilt binder attachment comes with a dedicated presser foot for use with IDT to ensure even feeding through the binder and a perfect result.

• The Double Fold 1/2 Inch (12mm) binder will turn a light weight woven fabric strip into a binding and attach it to the project edges all in one step.To bind edges with the 1/2 Inch (12mm) Quilt Binder, cut a 1 3/4 Inch (45mm) wide strip of light weight woven fabric.
• Attach the Quilt Foot with guide.
• Set the machine for straight stitch or hand look quilt stitch.
• Place the attachment plate on the stitch plate of the machine. Align pin on the back of attachment plate to the top opening on the stitch plate of the machine. Screw the attachment plate in place with one thumb screw.
• Place the binder on the attachment plate and adjust the binder to line up. Attach the binder in place with the two thumb screws and washers.
• Measure the length of your project and add at least 6 Inch (15cm).
• Cut enough 1 3/4 Inch (45mm) strips to equal that number and join the strips together. Cut the end of the strip into a point.
• Slide the fabric strip into the binder with the wrong side facing you using tweezers.
• When the fabric is through the end of the binder, hold the folded strip with y our left hand and continue to feed it into the binder as shown while the fabric forms a double fold tape.
• Raise the presser foot and pull the strip under the foot and straight back 2.5 Inch (5-6cm) behind the needle.